Ansel Alabaster Wall Sconce

$368.00

$368.00 ~~$0.00~~

Save 0%

Black Friday Coupon Open for the better offer Two ways to save. The better offer applies.

By quantity

By amount

Tap a code to copy

Size: 1-Head W 3″ x H 11.8″

1-Head W 3″ x H 11.8″

2-Head W 12.8″ x H 11.8″

Colour: Textured Gold Leaf

Textured Gold Leaf

Quantity

TRUSTED STORE

Affordable Price

Secure Checkout

Best Quality

Black Friday

Up to 20% off

Two ways to save. The better offer applies.

By quantity

10%1 pieceOME10

12%2 piecesOME12

15%3 piecesOME15

20%6 pieces or moreOME20

By amount

10%Under $235OM10

12%$235 and aboveOM12

15%$588 and aboveOM15

20%$1176 and aboveOM20

Use the code at checkout

Ansel Alabaster Wall Sconce

$368.00

$368.00 ~~$0.00~~

Product Description

FAQs

Installation Guide

Product reviews

The Ansel Alabaster Wall Sconce pairs a textured gold-leaf brass fixture with a cylindrical alabaster shade, held open at both ends by a right-angle bracket. A ringed, concentric-circle wall plate anchors a square-profile arm that projects the shade forward from the wall. Available as a 1-Head or 2-Head configuration.

Features

Cylindrical alabaster shade

An open-ended alabaster cylinder sits in a right-angle bracket, glowing warmly and showing off its natural veining.

Ringed wall plate

A round wall plate with concentric ring detailing anchors a square-profile arm projecting the shade forward.

Textured gold-leaf finish

A hand-applied gold-leaf texture covers the arm and wall plate, catching the light along every facet.

Configuration Options

1-Head

A single arm and shade project from the wall plate. W 7.5 × H 30 cm.

2-Head

Two arms and shades split from the wall plate at different heights. W 32.5 × H 30 cm.

Dimensions

1-Head
Width	W	7.5 cm / 3″
Height	H	30 cm / 11.8″
2-Head
Width	W	32.5 cm / 12.8″
Height	H	30 cm / 11.8″

W = overall width, H = overall height. Wall projection wasn't given separately this time.

Zoom

1-Head — Dimensions

Zoom

2-Head — Dimensions

Specifications

Product Name	Ansel Alabaster Wall Sconce
Product Type	Wall Sconce
Material	Brass, Alabaster
Finish	Textured Gold Leaf
Configuration Options	1-Head (W 7.5 × H 30 cm), 2-Head (W 32.5 × H 30 cm)
Bulb Socket	E12 or E14
Light Source	1-Head: 1 × E12/E14. 2-Head: 2 × E12/E14 (bulbs not included)
Mounting	Wall Mounted
Environment	Indoor

Alabaster is a natural stone; expect gentle variation between units.

Installation & Care

Mount to a secure, dry indoor wall surface using hardware suitable for the wall construction and fixture weight.
Installation should be performed by a qualified electrician in accordance with local electrical requirements.
Avoid abrasive rubbing on the gold-leaf finish, which can wear through the leafing over time; wipe gently with a soft, dry cloth.
Dust the alabaster shade gently with a soft, dry cloth and avoid water, solvents, or abrasive cleaners.
Disconnect power before cleaning or servicing the fixture.
Intended for indoor, dry use.

FAQs

What's the difference between the 1-Head and 2-Head?

The 1-Head has a single arm and shade (W 7.5 × H 30 cm); the 2-Head has two arms and shades splitting from the wall plate at different heights (W 32.5 × H 30 cm).

What is the shade made from?

Alabaster — a natural stone, so expect gentle variation in veining and tone between units.

What bulb does it use, and is one included?

E12 or E14 — one bulb for the 1-Head, two for the 2-Head. Bulbs are not included.

About Transportation

1. Does The Selected Shipping Service Apply To My Country And What Is The Carrier? How Long Will It Take To Arrive?

We offer free shipping to United States, Canada and Australia and most countries. Delivery time = Process time ( order preparation )+ Shipping time.

Shipping Methods	Free Shipping	Fast Shipping
Carry	EMS	UPS/DHL Express
Cost	Free	$114 per piece
Process Time	2-10 Working Days	1-2 Weeks
Shipping Time	2-5 Weeks	4-20 days
Delivery Area	To Most Countries	Only available to Norway, Iceland, Cyprus, Lebanon, and to U.S. extended areas including Puerto Rico, Alaska, and Hawaii.

In most cases, we will process and arrange shipment within 2-10 working days after receiving your order. Shipping time is 2-5 weeks, for the same country, shipping time varies from region to region.
• If you still have questions or need to ship to other countries, please contact us for inquiries: [email protected]
>> Please see our Shipping Policy for more details.

2. Can I track my order?

Yes. Once your order has shipped, you will receive an email with a tracking number.
Click on this link https://www.17track.net/en and enter the tracking number.
You can also contact our customer service team [email protected] for the latest logistics information.

About Returns and Refunds

1. How do I cancel an order?

You can cancel your order for free within 24 hours without any reason.
If your order has been shipped, it cannot be canceled. If you insist on canceling it, you will be charged 30%-50% of the order amount for our storage costs, order preparation costs and shipping costs. This fee will be deducted from the refund of your(s) item(s).

2. What if I receive a damaged item?

Products received with broken glass, dented shades or frames are not considered defective and cannot be returned. In this case, we will replace the glass or shades at no additional charge.If you do not wish to receive a replacement and wish to return the item, we will treat it as a normal return and charge up to 35% of the return fee. We also reserve the right to deduct all outbound shipping charges from refunds.

3. When will I receive the refund?

After receiving your return, it can take up to 5 working days for the funds to credit back to your original payment (PayPal: 1-2 days; Credit card: 3-5 days). If you still have any problem about refund, please get in touch with us at [email protected], we will reply you as soon as possible.
Please note that any cancellations or returns are subject to our Returns and Refunds Policy.

>>Learn more

About Product

1. Can this lamp be dimmed?

Dimming depends on the light source listed on the product page. The fixture does not include a dimmer switch or smart control.
Replaceable bulb (E26, E27, E14, G9, and similar sockets): the fixture can be dimmed only with a matching dimmable bulb and a compatible wall dimmer. The bulb is not included unless the product page says otherwise. A standard on/off switch will not dim the light. We do not install a dimmer inside the lamp.
Integrated LED (the light source cannot be replaced): the standard version is not dimmable unless the product page clearly offers a Dimmable option or lists Dimmable in the specifications. Warm light and cool light are color options, not dimming. If dimming is not listed, contact us before ordering. A custom dimmable version is not included by default and must be confirmed for compatibility, price, and lead time. It cannot be added automatically after checkout.

2. Can I have a longer cable?

We offer 150cm cable for most lamps. If you want a longer cable (within 800cm), please make a note when you place the order, we will extend the cable for free.

3. Does The Voltage Required By The Product I Purchased Match The Country Where I Am Located?

The voltage of our products will be adjusted according to your country as shown below.
110V-120V: USA, Canada, Mexico, Brazil, Japan.
220V-240V: UK, Australia, France, Netherlands, Italy, Germany, Spain, Norway, Ireland, Greece, Portugal, New Zealand, Belgium, South Africa, Egypt, Chile, Denmark, Singapore, Sweden, Israel, Switzerland.

Customer Reviews

Based on 0 reviews

No reviews yet. Be the first to review this product.

Write a Review

Rating

Name

E-mail

Your review

Photos (up to 5)

Verification Code

Choose how to install the light.

Tap a situation. The drawing marks the measurement, so you can see where to start.

76–91 cm

The line marks 76–91 cm from the bottom of the shade to the tabletop.

Dining table

Measure the table, not the room. Then check the light from every seat.

How to measure: Length and width of the top. For a round table, the diameter.
Starting size: Round: about half to two thirds of the width. Long: half to two thirds of the length.
Where to place it: Center the light over the table, even if the room center is elsewhere.
Clearance: Start with 76–91 cm from the shade bottom to the tabletop.

On a long table, two smaller pendants usually look better than one oversized light.

Before you drillTape a paper template to the ceiling and check it from the doorway and from a seat.

MeasureTop to shade bottom

Height76–91 cm

AlignCenter of the table

76–91 cm

The line marks 76–91 cm from the bottom of the shade to the island.

Kitchen island

Measure the usable island and keep the lights on its center line.

How to measure: Length and width of the working surface, not an unused overhang.
Starting size: One linear light: half to two thirds of the length. Several pendants: choose diameter first, then the count.
Where to place it: Even centers on the island’s center line.
Clearance: 76–91 cm above the counter. Leave the ends clear.

Mock the whole row, not a single pendant.

Before you drillThree paper circles show bad spacing before you drill.

MeasureCounter to shade bottom

Height76–91 cm

AlignEven centers

210 cm

The line marks 210 cm of clear walking room, from the lowest point to the floor.

Center of the room

Length plus width gives the starting diameter. Ceiling height decides whether it can hang.

How to measure: Length and width in centimetres.
Starting size: (Length + width in metres) × 8.3 ≈ diameter in cm. Example: 3.7 + 3.0 → about 56 cm.
Where to place it: Place it in the usable center of the room, not over a walking path.
Clearance: In the walkway, keep at least 210 cm under the lowest point.

An open form looks lighter. A dark, closed shade looks larger.

Before you drillCheck that the ceiling box can carry the weight before you drill.

MeasureL + W (m) × 8.3

Height210 cm walkway

AlignUseful center

210 cm

The line marks 210 cm of headroom. Space the lights 180–240 cm apart.

Hall and entry

A rhythm of small lights works better than one oversized piece in the middle.

How to measure: Clear length and width. Mark swinging doors and the start of the stairs.
Starting size: In a narrow hall, try a compact fitting about every 180–240 cm.
Where to place it: On the center line of the path.
Clearance: At least 210 cm under the lowest point. Do not block an open door.

A dimmer makes the same lights easier by day and by night.

Before you drillThe count comes from the spacing, not from one oversized diameter.

MeasureEvery 180–240 cm

Height210 cm walkway

AlignHall center line

165–178 cm8–15 cm8–15 cm

The line marks 165–178 cm from the floor to the center of the sconce. Leave 8–15 cm to the mirror.

Bathroom mirror

Light from the sides usually softens the face better than one light from above.

How to measure: Mirror width and height, and the wall space on each side.
Starting size: A pair of sconces: center at 165–178 cm from the floor. A bar over the mirror: about three quarters of its width.
Where to place it: Place the pair symmetrically. The nearest edge, 8–15 cm from the mirror.
Clearance: Check the frame, cabinet doors and tap. Choose a fitting rated for moisture.

If the sides are too tight, use a wide, diffused bar over the mirror.

Before you drillHold the sconce at the planned height and check the reflection before wiring.

Measure165–178 cm

Height8–15 cm to the mirror

AlignSymmetric pair

Shoulder

The dashed line runs through the seated shoulder: the bottom of the shade sits at that height.

Bedside

The seated position in bed matters, not the view from the door.

How to measure: Mattress height, and the height and width of the nightstand.
Starting size: Shade bottom near seated shoulder height.
Where to place it: Beside the bed, on the nightstand, with the light toward the book and not into the eyes.
Clearance: Keep the cord off the pillow. The switch should be reachable from bed.

Two different nightstands often need lights that adjust separately.

Before you drillTest it sitting up. What looks balanced from the door can glare at pillow height.

MeasureSeated shoulder

HeightSwitch in reach

AlignLight on the book

Eyes

The dashed line marks seated eye height. The shade sits above it, beside the shoulder.

Reading chair

Place the light beside or slightly behind the shoulder. Keep the brightest source out of view.

How to measure: Seat height and the distance to the planned lamp. Sit as you read.
Starting size: Floor lamp: shade bottom near seated eye height.
Where to place it: Beside or slightly behind the shoulder, never in front of the face.
Clearance: Keep the base out of the path. The bulb should not be visible at eye height.

Test with the other lights on and off. A dimmer helps at night.

Before you drillIf it still glares, lower the lamp, or choose a deeper shade or more diffusion.

MeasureSeated eyes

HeightOut of the path

AlignBeside or behind

Discover the Story of OME Lighting

At OME Lighting, we believe lighting is more than just functionality — it’s an art that transforms your space. Each piece is carefully designed with a passion for craftsmanship and timeless aesthetics. From our hand-polished brass finishes to our signature glass shades, we create pieces that elevate every corner of your home.

About Us

Ansel Alabaster Wall Sconce

Ansel Alabaster Wall Sconce

Cylindrical alabaster shade

Ringed wall plate

Textured gold-leaf finish

1-Head

2-Head

Customer Reviews

Choose how to install the light.

Dining table

Kitchen island

Center of the room

Hall and entry

Bathroom mirror

Bedside

Reading chair

Our Picks for You

Our Picks for You

Styled by Our Customers

Discover the Story of OME Lighting

Elevate Your Interior

Vanity Lights

Fabric Lamps

Aurenza Series

About Omelighting

Customer Service

Newsletter

Cart