Wyatt Alabaster-Pendelleuchte

Wyatt Alabaster
Pendelleuchte

Eine niedrige, runde Pendelleuchte hängt in einer schlichten Silhouette mit klaren Kanten an einem Diffusor aus gepresstem Alabaster. Der Schirm schwebt über dem Raum und spendet zusammen mit einer integrierten LED warmes Licht nach unten. Ein Messingkörper vervollständigt die Form und jeder Schirm weist seine eigene natürliche Maserung auf

Stein, Messing und warmes Licht

Ein Diffusor aus gepresstem Alabaster und ein Messingkörper sind in drei Größen und drei Ausführungen erhältlich, mit integrierter LED-Beleuchtung

Messing und Alabaster

Der Körper besteht aus Messing und der Schirm aus gepresstem Alabaster mit natürlichen Maserungen, die von Stück zu Stück variieren

Drei Größen

Wählen Sie einen Durchmesser von 20, 25 oder 30 cm, jeweils 5 cm hoch, mit einem 59-Zoll-Aufhängedraht

Drei Zieleinläufe

Der Anhänger ist in Vintage-Messing, Schwarz oder Weiß erhältlich

Größe und Licht

20 cm	T 20 cm x H 5 cm / ∅ 7,9″ x H 2″. 59" Hängedraht
25 cm	T 25 cm x H 5 cm / ∅ 9,8″ x H 2″. 59" Hängedraht
30 cm	T 30 cm x H 5 cm / ∅ 11,8″ x H 2″. 59" Hängedraht
Quelle	Integrierte LED
20 cm Ausgang	Leistung ~ 10 W, 1100 Lumen
25 cm Ausgang	Leistung ~ 15 W, 1165 Lumen
30 cm Ausgang	Leistung ~20 W, 2200 Lumen
Dimmen	Die Standard-LED ist nicht mit Wanddimmerschaltern kompatibel
Optionen	Vintage Messing, Schwarz, Weiß
Materialien	Körper aus Messing, Schirm aus Alabaster

20 cm

T 20 cm x H 5 cm / ∅ 7,9″ x H 2″. 59" Hängedraht

25 cm

T 25 cm x H 5 cm / ∅ 9,8″ x H 2″. 59" Hängedraht

30 cm

T 30 cm x H 5 cm / ∅ 11,8″ x H 2″. 59" Hängedraht

Quelle

Integrierte LED

20 cm Ausgang

Leistung ~ 10 W, 1100 Lumen

25 cm Ausgang

Leistung ~ 15 W, 1165 Lumen

30 cm Ausgang

Leistung ~20 W, 2200 Lumen

Dimmen

Die Standard-LED ist nicht mit Wanddimmerschaltern kompatibel

Optionen

Vintage Messing, Schwarz, Weiß

Materialien

Körper aus Messing, Schirm aus Alabaster

Choose how to install the light.

Tap a situation. The drawing marks the measurement, so you can see where to start.

76–91 cm

The line marks 76–91 cm from the bottom of the shade to the tabletop.

Dining table

Measure the table, not the room. Then check the light from every seat.

How to measure: Length and width of the top. For a round table, the diameter.
Starting size: Round: about half to two thirds of the width. Long: half to two thirds of the length.
Where to place it: Center the light over the table, even if the room center is elsewhere.
Clearance: Start with 76–91 cm from the shade bottom to the tabletop.

On a long table, two smaller pendants usually look better than one oversized light.

Before you drillTape a paper template to the ceiling and check it from the doorway and from a seat.

MeasureTop to shade bottom

Height76–91 cm

AlignCenter of the table

76–91 cm

The line marks 76–91 cm from the bottom of the shade to the island.

Kitchen island

Measure the usable island and keep the lights on its center line.

How to measure: Length and width of the working surface, not an unused overhang.
Starting size: One linear light: half to two thirds of the length. Several pendants: choose diameter first, then the count.
Where to place it: Even centers on the island’s center line.
Clearance: 76–91 cm above the counter. Leave the ends clear.

Mock the whole row, not a single pendant.

Before you drillThree paper circles show bad spacing before you drill.

MeasureCounter to shade bottom

Height76–91 cm

AlignEven centers

210 cm

The line marks 210 cm of clear walking room, from the lowest point to the floor.

Center of the room

Length plus width gives the starting diameter. Ceiling height decides whether it can hang.

How to measure: Length and width in centimetres.
Starting size: (Length + width in metres) × 8.3 ≈ diameter in cm. Example: 3.7 + 3.0 → about 56 cm.
Where to place it: Place it in the usable center of the room, not over a walking path.
Clearance: In the walkway, keep at least 210 cm under the lowest point.

An open form looks lighter. A dark, closed shade looks larger.

Before you drillCheck that the ceiling box can carry the weight before you drill.

MeasureL + W (m) × 8.3

Height210 cm walkway

AlignUseful center

210 cm

The line marks 210 cm of headroom. Space the lights 180–240 cm apart.

Hall and entry

A rhythm of small lights works better than one oversized piece in the middle.

How to measure: Clear length and width. Mark swinging doors and the start of the stairs.
Starting size: In a narrow hall, try a compact fitting about every 180–240 cm.
Where to place it: On the center line of the path.
Clearance: At least 210 cm under the lowest point. Do not block an open door.

A dimmer makes the same lights easier by day and by night.

Before you drillThe count comes from the spacing, not from one oversized diameter.

MeasureEvery 180–240 cm

Height210 cm walkway

AlignHall center line

165–178 cm8–15 cm8–15 cm

The line marks 165–178 cm from the floor to the center of the sconce. Leave 8–15 cm to the mirror.

Bathroom mirror

Light from the sides usually softens the face better than one light from above.

How to measure: Mirror width and height, and the wall space on each side.
Starting size: A pair of sconces: center at 165–178 cm from the floor. A bar over the mirror: about three quarters of its width.
Where to place it: Place the pair symmetrically. The nearest edge, 8–15 cm from the mirror.
Clearance: Check the frame, cabinet doors and tap. Choose a fitting rated for moisture.

If the sides are too tight, use a wide, diffused bar over the mirror.

Before you drillHold the sconce at the planned height and check the reflection before wiring.

Measure165–178 cm

Height8–15 cm to the mirror

AlignSymmetric pair

Shoulder

The dashed line runs through the seated shoulder: the bottom of the shade sits at that height.

Bedside

The seated position in bed matters, not the view from the door.

How to measure: Mattress height, and the height and width of the nightstand.
Starting size: Shade bottom near seated shoulder height.
Where to place it: Beside the bed, on the nightstand, with the light toward the book and not into the eyes.
Clearance: Keep the cord off the pillow. The switch should be reachable from bed.

Two different nightstands often need lights that adjust separately.

Before you drillTest it sitting up. What looks balanced from the door can glare at pillow height.

MeasureSeated shoulder

HeightSwitch in reach

AlignLight on the book

Eyes

The dashed line marks seated eye height. The shade sits above it, beside the shoulder.

Reading chair

Place the light beside or slightly behind the shoulder. Keep the brightest source out of view.

How to measure: Seat height and the distance to the planned lamp. Sit as you read.
Starting size: Floor lamp: shade bottom near seated eye height.
Where to place it: Beside or slightly behind the shoulder, never in front of the face.
Clearance: Keep the base out of the path. The bulb should not be visible at eye height.

Test with the other lights on and off. A dimmer helps at night.

Before you drillIf it still glares, lower the lamp, or choose a deeper shade or more diffusion.

MeasureSeated eyes

HeightOut of the path

AlignBeside or behind

Entdecken Sie die Geschichte von OME Lighting

Bei OME Lighting glauben wir, dass Beleuchtung mehr als nur Funktionalität ist – sie ist Kunst, die Ihren Raum verwandelt. Jedes Stück wird mit viel Liebe zum Detail und mit Leidenschaft für handwerkliches Können und zeitlose Ästhetik entworfen. Von unseren handpolierten Messingoberflächen bis hin zu unseren charakteristischen Glasschirmen kreieren wir Leuchten, die jeden Winkel Ihres Zuhauses aufwerten.

Über uns

Versandarten	Kostenloser Versand	Schneller Versand
Tragen	Rettungsdienst	UPS/DHL Express
Kosten	Frei	114 US-Dollar pro Stück
Bearbeitungszeit	2-10 Werktage	1-2 Wochen
Lieferzeit	2-5 Wochen	4-20 Tage
Liefergebiet	In die meisten Länder	Nur verfügbar für Norwegen, Island, Zypern, Libanon und die erweiterten Gebiete der USA einschließlich Puerto Rico, Alaska und Hawaii.

Wyatt Alabaster-Pendelleuchte