
Aspas de ventilador con acabado de madera
Las aspas en tono nogal aportan un acabado cálido, similar al de un mueble, a la forma compacta de este ventilador de techo.
By quantity
By amount
Tap a code to copy
Black Friday
Hasta un 20% de descuento
Dos tipos de descuento. Se aplica el más favorable.
Por cantidad
10%1 piezaOME10
12%2 piezasOME12
15%3 piezasOME15
20%6 piezas o másOME20
Por importe
10%Menos de 200 €OM10
12%Desde 200 €OM12
15%Desde 500 €OM15
20%Desde 1000 €OM20
Usa el código al pagar
VISUALIZACIÓN DE DETALLES
Este ventilador de techo empotrado combina aspas con vetas de madera cálidas con un cuerpo compacto de color negro, lo que aporta un toque vintage a las habitaciones cotidianas sin ocupar mucho espacio.

Las aspas en tono nogal aportan un acabado cálido, similar al de un mueble, a la forma compacta de este ventilador de techo.

La carcasa de techo en negro mate le da al ventilador un aspecto clásico y sobrio que contrasta con los techos claros.

El difusor redondo de acrílico suaviza la fuente de luz del chip LED integrado y mantiene limpio el perfil central.
HISTORIA INSPIRADORA
Úselo donde una habitación necesite circulación de aire, una presencia compacta en el techo y un acabado más cálido similar al de un mueble sobre camas, sofás, escritorios o mesas de comedor pequeñas.

ESPECIFICACIONES DEL PRODUCTO
Utilice la tabla y la tira de estilos que aparecen a continuación para confirmar el estilo de la cuchilla, las combinaciones de tamaños, el voltaje, la fuente de luz con chip LED integrado, los materiales y el uso recomendado en la habitación.




| Opciones de estilo | 3 hojas, 5 hojas |
|---|---|
| Opciones de tamaño | 36 pulgadas, 42 pulgadas, 52 pulgadas |
| Combinaciones válidas | 3 hojas / 36 pulgadas, 3 hojas / 42 pulgadas, 5 hojas / 42 pulgadas, 5 hojas / 52 pulgadas |
| Tipo de fuente de luz | Fuente de luz con chip LED integrado |
| Bombillas incluidas | No se requieren bombillas separadas |
| Voltaje | 110V-240V |
| 36 pulgadas de diámetro | Aprox. 90 cm / 35,4 pulgadas |
| 42 pulgadas de diámetro | Aprox. 105 cm / 41,3 pulgadas |
| 52 pulgadas de diámetro | Aprox. 129 cm / 50,8 pulgadas |
| Altura del accesorio | Aprox. 25 cm / 9,8 pulgadas |
| Material | Cuerpo metálico, difusor acrílico, aspas de ventilador con acabado imitación madera. |
| Espacios recomendados | Dormitorio, sala de estar, comedor, estudio, habitación de invitados compacta |
Practical guide
Tap a situation. The drawing marks the measurement, so you can see where to start.
76–91 cmThe line marks 76–91 cm from the bottom of the shade to the tabletop.
01
Measure the table, not the room. Then check the light from every seat.
On a long table, two smaller pendants usually look better than one oversized light.
Before you drillTape a paper template to the ceiling and check it from the doorway and from a seat.
76–91 cmThe line marks 76–91 cm from the bottom of the shade to the island.
02
Measure the usable island and keep the lights on its center line.
Mock the whole row, not a single pendant.
Before you drillThree paper circles show bad spacing before you drill.
210 cmThe line marks 210 cm of clear walking room, from the lowest point to the floor.
03
Length plus width gives the starting diameter. Ceiling height decides whether it can hang.
An open form looks lighter. A dark, closed shade looks larger.
Before you drillCheck that the ceiling box can carry the weight before you drill.
210 cmThe line marks 210 cm of headroom. Space the lights 180–240 cm apart.
04
A rhythm of small lights works better than one oversized piece in the middle.
A dimmer makes the same lights easier by day and by night.
Before you drillThe count comes from the spacing, not from one oversized diameter.
165–178 cm8–15 cm8–15 cmThe line marks 165–178 cm from the floor to the center of the sconce. Leave 8–15 cm to the mirror.
05
Light from the sides usually softens the face better than one light from above.
If the sides are too tight, use a wide, diffused bar over the mirror.
Before you drillHold the sconce at the planned height and check the reflection before wiring.
ShoulderThe dashed line runs through the seated shoulder: the bottom of the shade sits at that height.
06
The seated position in bed matters, not the view from the door.
Two different nightstands often need lights that adjust separately.
Before you drillTest it sitting up. What looks balanced from the door can glare at pillow height.
EyesThe dashed line marks seated eye height. The shade sits above it, beside the shoulder.
07
Place the light beside or slightly behind the shoulder. Keep the brightest source out of view.
Test with the other lights on and off. A dimmer helps at night.
Before you drillIf it still glares, lower the lamp, or choose a deeper shade or more diffusion.