
Pales de ventilateur à grain de bois
Les pales couleur noyer confèrent à ce ventilateur de plafond compact une finition chaleureuse, digne d'un meuble.
By quantity
By amount
Tap a code to copy
Black Friday
Jusqu'à 20% de réduction
Deux modes de remise. La plus avantageuse s’applique.
Par quantité
10%1 pièceOME10
12%2 piècesOME12
15%3 piècesOME15
20%6 pièces ou plusOME20
Par montant
10%Moins de 200 €OM10
12%Dès 200 €OM12
15%Dès 500 €OM15
20%Dès 1000 €OM20
Saisissez le code au paiement
AFFICHAGE DÉTAILLÉ
Ce ventilateur de plafond encastré associe des pales à l'aspect chaleureux du bois à un corps de plafond noir compact, apportant aux pièces du quotidien une touche vintage sans encombrement.

Les pales couleur noyer confèrent à ce ventilateur de plafond compact une finition chaleureuse, digne d'un meuble.

Le boîtier de plafond noir mat confère au ventilateur un aspect vintage et sobre, contrastant avec les plafonds clairs.

Le diffuseur rond en acrylique adoucit la lumière de la puce LED intégrée et préserve la pureté du profil central.
HISTOIRE INSPIRANTE
Utilisez-le là où une pièce a besoin de circulation d'air, d'une présence compacte au plafond et d'une finition plus chaleureuse, semblable à celle des meubles, au-dessus des lits, des canapés, des bureaux ou des petites tables à manger.

SPÉCIFICATIONS DU PRODUIT
Utilisez le tableau et la bande de style ci-dessous pour confirmer le style de lame, les combinaisons de taille, la tension, la source lumineuse à puce LED intégrée, les matériaux et l'utilisation recommandée dans la pièce.




| Options de style | 3 lames, 5 lames |
|---|---|
| Options de taille | 36 pouces, 42 pouces, 52 pouces |
| Combinaisons valides | 3 lames / 91 cm, 3 lames / 107 cm, 5 lames / 107 cm, 5 lames / 132 cm |
| Type de source lumineuse | Source lumineuse à puce LED intégrée |
| Ampoules incluses | Aucune ampoule séparée requise |
| Tension | 110V-240V |
| 36 pouces de diamètre | Environ 90 cm / 35,4 pouces |
| 42 pouces de diamètre | Environ 105 cm / 41,3 pouces |
| 52 pouces de diamètre | Environ 129 cm / 50,8 pouces |
| Hauteur du luminaire | Environ 25 cm / 9,8 pouces |
| Matériel | Corps en métal, diffuseur en acrylique, pales de ventilateur imitation bois |
| Espaces recommandés | Chambre, salon, salle à manger, bureau, chambre d'amis compacte |
Practical guide
Tap a situation. The drawing marks the measurement, so you can see where to start.
76–91 cmThe line marks 76–91 cm from the bottom of the shade to the tabletop.
01
Measure the table, not the room. Then check the light from every seat.
On a long table, two smaller pendants usually look better than one oversized light.
Before you drillTape a paper template to the ceiling and check it from the doorway and from a seat.
76–91 cmThe line marks 76–91 cm from the bottom of the shade to the island.
02
Measure the usable island and keep the lights on its center line.
Mock the whole row, not a single pendant.
Before you drillThree paper circles show bad spacing before you drill.
210 cmThe line marks 210 cm of clear walking room, from the lowest point to the floor.
03
Length plus width gives the starting diameter. Ceiling height decides whether it can hang.
An open form looks lighter. A dark, closed shade looks larger.
Before you drillCheck that the ceiling box can carry the weight before you drill.
210 cmThe line marks 210 cm of headroom. Space the lights 180–240 cm apart.
04
A rhythm of small lights works better than one oversized piece in the middle.
A dimmer makes the same lights easier by day and by night.
Before you drillThe count comes from the spacing, not from one oversized diameter.
165–178 cm8–15 cm8–15 cmThe line marks 165–178 cm from the floor to the center of the sconce. Leave 8–15 cm to the mirror.
05
Light from the sides usually softens the face better than one light from above.
If the sides are too tight, use a wide, diffused bar over the mirror.
Before you drillHold the sconce at the planned height and check the reflection before wiring.
ShoulderThe dashed line runs through the seated shoulder: the bottom of the shade sits at that height.
06
The seated position in bed matters, not the view from the door.
Two different nightstands often need lights that adjust separately.
Before you drillTest it sitting up. What looks balanced from the door can glare at pillow height.
EyesThe dashed line marks seated eye height. The shade sits above it, beside the shoulder.
07
Place the light beside or slightly behind the shoulder. Keep the brightest source out of view.
Test with the other lights on and off. A dimmer helps at night.
Before you drillIf it still glares, lower the lamp, or choose a deeper shade or more diffusion.